Plastics Processing Machines

Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.

Clamping force: 100kN, tie-bar spacing: 470mm, mains connection: 400V/50Hz/64A, control: CDIAS, weight: 5.7t, an on-site inspection is possible.

Mains voltage: 400V, 3L+N, 230V, 3L, rated current: 7.5A at 400V, 11A at 230V, frequency: 50/60Hz, short-circuit breaking capacity: 3.5kA, weight: 370kg, an on-site inspection is possible.

A hydraulic injection molding machine is offered. Tie-bar spacing: 520mm x 520mm, clamping force: 1700kN, locking force: 1870kN, max. opening stroke: 500mm, mold height min./max.: 275mm/585mm, screw diameter: 45mm, injection pressure: 1914bar, shot w...

Two Optitek mould carriers with a control unit in the middle are offered. Opening width min./max.: 600mm/800mm, operating pressure: 6bar, hydraulic pressure: 50bar-200bar, max. clamping force at 200bar: approx. 779.8kN, max. opening force at 200bar: ...

Clamping force: 80t, 3-phase mains supply: 400V, 50Hz, total rated current: 130A, upstream fuse: 160A, max. motor current: 30A, an on-site inspection is possible. The machine is located in Hungary.

A Maguire vacuum dryer for plastic granulate is offered. Throughput: approx. 65kg/h, heating power: 11kW, max. operating temperature: 190°C, heating hopper volume: 70l, vacuum chamber volume: 28l, retention hopper volume: 45l, voltage: 400V/3Ph, freq...

Max. locking force: 3500kN, clear tie-bar spacing: 710x710mm, min. mold height: 380mm, max. opening stroke: 1300mm minus mold height, max. ejector stroke: 250mm, max. ejector force: 95kN, ejector retraction force: 48kN, rotary table diameter: 890mm, ...

Clamping force: 6500kN, locking force: 7150kN, max. opening stroke: 930mm, mold height: 360-920mm, max. distance between mold mounting platens: 1850mm, mold mounting platens: 1350x1350mm, clear tie-bar spacing: 900x900mm, max. mold weight: 8.6t, max....

A package of six injection moulds for the series production of office organization products is available. The molds can be used to manufacture nestable filing trays, PET filing trays A4-C4, high-gloss and matte PS filing trays, a frame for a 3-tier f...

Clamping force: 800kN, an on-site inspection is possible.

Press force: 2800kN, heating platen size X/Y: 500mm/500mm, daylight between the heating platens: 200mm, max. hydraulic pressure: 300bar, heating power: 9.4kW, drive power: 7.5kW, control: Siemens S5 with OP17, weight: approx. 5000kg. Equipped with sl...

Press force: 2800kN, heating platen size X/Y: 500mm/500mm, daylight between the heating platens: 200mm, max. hydraulic pressure: 300bar, heating power: 9.4kW, drive power: 7.5kW, control: Siemens S5 with OP17, weight: approx. 4500kg. Equipped with sl...

Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible.

Clamping force: 650kN, length: 4000mm, width: 1600mm, height: 2200mm, weight: 3.9t, an on-site inspection is possible.

Clamping force: 1600kN, width: 1600mm, height: 2200mm, weight: 6.8t, an on-site inspection is possible.

Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible.

Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.

Condition: used, with visible signs of use, was operational until placed in storage, control voltage: 24V, operating voltage: 230V, frequency: 50Hz, CO₂ pressure: 10bar, connected load: 500W, with CE marking. An on-site inspection is possible.

A BATTENFELD large-format horizontal injection molding machine in need of repair is offered. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing X/Y: 900mm/...

A PUR foaming system with Yaskawa industrial robot is offered. Min. dispensing rate: approx. 0.15g/s, max. dispensing rate: 1.6g/s, material system: polyurethane Penguin Foam 3151/3157, drum capacity: 200l, operating voltage: 3 × 400V/N/PE, frequency...

A Klöckner DESMA rubber injection molding machine with increased clamping pressure is offered. Material processing: rubber, clamping force: 4500kN, min./max. mold height: 180mm/530mm, adjustable opening stroke: 570mm, clear distance between tie bars ...

Clamping force: 500kN, tie-bar spacing: 320x320mm, cylinder diameter: D30, control: Arburg SLOGICA, automatic operating hours: 63.147h, pump operating hours: 65.755h, semi-automatic operating hours: 14h, cycles: 13.943.435. An on-site inspection is p...

Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible.